Ceramic coating in Panipat
Done at our own studio on Refinery Road, so your car never has to leave the city. Built for paint that faces GT Road grime and factory dust every day.
Why paint in Panipat dulls so quickly
Park a car near the textile units for a week and wipe a finger across the roof. You will pick up a grey mix of fibre, dye particles and soot. Add the diesel film from trucks on GT Road and the smoke drifting from the industrial belt, and the shine on a new car fades within months.
Washing harder does not fix it. Those particles sit in the clear coat, and rubbing them around with a cloth just adds swirl marks. A ceramic coating changes the surface so the grime has far less to hold on to.
What a coating handles on Panipat roads
These are the things we clean off Panipat cars most often, and how a coated panel copes with each one.
Textile lint and dye dust
Fine fibres cling to bare paint by static. On a slick coated surface they rinse off with a hose.
GT Road soot and tar
The black film on the rear and the tar spots behind the wheels come away with a normal shampoo wash instead of a solvent.
Refinery and factory fallout
Metal and chemical particles that would bond and etch in summer heat stay on top of the layer until you wash them off.
Hard water rings
Spots from tap and borewell water are much easier to remove and far less likely to etch.
A coating does not stop stone chips from trucks on the highway. If you drive to Delhi or Karnal often, ask about PPF in Panipat for the bonnet and bumper.
Picking a grade for the way you drive
The longer you plan to keep the car and the more it sits outside, the more a higher grade pays back.
| Your situation | Grade we usually suggest | Expected life |
|---|---|---|
| Older car, mostly city use, want to try a coating | 7H | About 1 year |
| Daily commute inside Panipat, covered parking at home | 8H | About 2 years |
| New car, regular GT Road trips, parked outside | 9H | About 3 years |
| Dark colour or a car you will keep for many years | 9H+ | Up to 5 years |
What happens on the day at Refinery Road
Drop the car in the morning and this is how the work runs.
Deep clean
Foam wash, iron remover and clay to lift the fallout and tar that ordinary washing leaves in the paint.
Machine polish
A single-stage polish is included to clear light swirls so they are not sealed under the coating.
Coating layers
We apply and level the coating panel by panel, adding layers according to the grade.
Curing and checks
The car stays indoors while the layer sets, then we inspect it under lights before handing over the warranty card.
Keeping it beading through the year
For the first week, keep the car dry and avoid shampoo washes while the coating hardens. After that, rinse the dust off first, wash with a pH-neutral shampoo and a clean mitt, and dry with a soft towel. Our guide on washing a coated car covers the details.
Avoid roadside washers who use one cloth for every car. In the monsoon, rinse road spray off sooner rather than later, and see our monsoon car care tips. A spray sealant top-up every few months keeps the water beading strong.
Booking at the Panipat studio
Our studio is at Refinery Road, opp. Imperium Height, near Indian Oil CNG pump and Elite Hotel, New Shanti Nagar Phase-2, Shanti Nagar, Panipat, Haryana 132103, open Monday to Saturday from 9 AM to 7 PM. Higher grades need the car for a full day or longer, so it helps to book a slot in advance on +91 99917 05055.
Grade costs are on the price list. If the paint has deep marks that need more than the included polish, we show you on the car and quote paint correction separately.
Questions people ask
Will a coating stop textile lint sticking to my car?
It will still land on the car, but it no longer grips the paint the same way. A rinse removes most of it, and you avoid the dry wiping that causes swirls.
Do I need to go to Sonipat for a 9H+ coating?
No, ceramic coating is done at the Panipat studio itself. Call ahead for 9H+ because it needs the car for 1 to 2 days.
My car is parked near the refinery all day. Which grade?
For long outdoor parking near industry, 9H or 9H+ holds up better because of the extra layers. Wash it every week or two so fallout does not sit on the coating for long.
Can you coat a car that already has PPF?
Yes, we can coat over the film. It makes the film slicker and easier to clean, and the job is shorter because film does not need polishing.
Is the coating safe in a car wash with brushes?
Brush washes scratch coatings the same way they scratch paint. A hand wash with clean mitts is the way to make a coating last its full life.
How soon can I drive on GT Road after coating?
You can drive the car home the same day once curing is done. Try to keep it out of rain and avoid washing it for the first 7 days.
Where the work is done
Panipat studio
Refinery Road, opp. Imperium Height, near Indian Oil CNG pump and Elite Hotel, New Shanti Nagar Phase-2, Shanti Nagar, Panipat, Haryana 132103
Monday to Saturday, 9 AM to 7 PM. Sunday closed.
Want an exact price for your car?
Send the car model and a couple of photos on WhatsApp. We reply with the right option and the price, usually the same day.